RONKA KA110 Flashing Tape is a self-adhesive polymer modified bitumen adhesive tape backed with a durable material that creates a watertight seal on almost any surface. It is ready to use and ideal for sealing and repairing of metal sheeting, water tanks, pipes and gutters.
SPECIFICATION
| Thickness | 1.0mm,1.2mm,1.5mm |
| Width | 5cm, 10cm, 15cm, 20cm-100cm |
| Length | 10m, 15m roll |
ADVANTAGE
APPLICATION
Widely used on roofs - around chimneys and skylights, over tile joints / cracks and roof cladding. External walls - joints and cracks in asbestos cement slabs, cracks under masonry connections and anchors, cracks around wall penetrations (such as water pipes), drains and downpipes. Terrace - joints between terrace and exterior wall, parapet joints, roof edges, sides, flashing and joints. Inside the house - leaking pipes, showers, etc.
Adhesion
Steel, aluminium, metals, concrete, stone, bricks, cement plaster, polycarbonate, PVC, glass, and wood.
How To Use
1.The surfaces to be sealed must be dry, capable of bearing load and free from grease and dust.Remove all loose dust and dirt with a wire brush and soft broom from the area of application.
2.Unroll and cut the tape to the required length.
3.Peel the backing strip and apply the adhesive side onto the prepared substrate.
4.Smooth down using a roller or gentle fingertip pressure to prevent air pockets and creases, and to ensure a good tight seal.It is very important to press down the edges and ends of the tape.
STORAGE
Store in place 10°C to 40°C. Recommended storage is 12 months.