RONKA KA210 Self-Adhesive Bitumen Waterproof Membrane is made of excellent modified bitumen coated aluminum film, produced with the latest patented technology and a special process. KA210 uses the environment-friendly solvent-free sealing adhesive material. It is a quick and effective method of sealing and repairing that produces a lasting protection in all climates.
SPECIFICATION
| Thickness | 1.2mm, 1.5mm, 2.0mm |
| Width | 1000mm |
| Length | 10m-25m/ roll |
ADHESION
Steel, metals, concrete, cement, stone, bricks, cement plaster, glass, wood, etc.
APPLICATION
Widely used in waterproofing projects of roof, floor and underground.
ADVANTAGE
HOW TO USE
1. Substrates to be stuck must be clean, dry and free from dust, dirt, oil,rust and loose materials. Poor surface preparation may result in lifting and delamination of the membrane.
2. Unroll the membrane and measure the correct length for the area.
3. Peel off the release film from one end and press the membrane firmly onto the surface.
4. The membrane must be overlapped at the edge by at least 5-8cm and on the end by at least 15cm.
5. Press membrane with a rubber hand roller, working from the center outwards, remove any air bubbles and creases to ensure its firm contact with the surface.
STORAGE
12 months from date of production. Stored in unopened and undamaged original sealed containers in dry conditions. Protected from direct sunlight at +5°C ~ +40°C.