RONKA KA500 Leak Stopping Putty is made of special cement and additives with advanced technology. It is an efficient moisture-proof, impermeable and plugging material. KA500 is also an excellent bonding material. It is a single component gray powder material.
APPLICATION
Damp-proof and rapid plugging of underground buildings, pools, toilets, subways and tunnels.
Emergency repair of underground pipelines, tap water, dams and infrastructures.
ADVANTAGE
Quick Plugging under Running Water
Easy Construction
Damp Proof and Leak Resistance
No Peeling, Cracking and Falling Off
Non toxic, odorless and environmentally friendly
HOW TO USE
1. Clean the leakage surface and keep it firm. For rough and uneven places, KA500 can be mixed with 2 times the weight of sand and troweled.
2. Add clean water to KA500 at about KA500 : water=1: 0.3~0.4, and quickly stir it into a fine putty. Quickly apply the first layer with the prepared putty on the surface. Then wipe the surface water marks after the first layer solidification, and then apply the second layer. If there is still a large area of water seepage, apply the third layer until there is no leakage.
3. Note that filling the cracks or leakage points with putty and press it tightly, rather than just covering the surface.
4. It is better to cover with damp articles for protecting for 2-3 days.
CAUTION
Don't make too much at one time to avoid wasting materials due to solidification.
The powder is mixed at one time. Do not add water for mixing twice. Do not add water after initial solidification.
Please apply it within 5 minutes after mixing. The actual situation depends on the temperature and humidity.
Be sure to scrape back and forth several times to make the coating cover firm.
STORAGE & SHELF LIFE
Store in a cool place in +5~40℃without moisture and sun. It will not deteriorate without moisture. If it is damp and caked, it cannot be used again.